Flat Preloader Icon

How to Wash FR Clothing

welder working wearing FR clothing

As welders, Flame-Retardant FR clothing is a standard PPE. Every layer of welding protection is a must since fire and heat is a thing we deal with on a daily basis. By this time, you may already have invested in FR welding jackets, FR welding shirts, or FR welding pants. With daily use, they may now have seen a bit of wear and tear. The question is, have you been washing them the right way? Remember, for FR clothing to work properly, they need to be well maintained. Here’s how to properly wash FR clothing. 

 

Before we move on, you should know the difference between flame retardant welding clothing and flame resistant welding clothing. Flame retardant clothing only has a coat of fire-resistant material while fire-resistant clothing is literally made of resistant material. Whichever type you have, you could use this process for proper upkeep. 

 

welder working wearing FR clothing

How to Wash FR Clothing

Wash FR clothing separately in a Cotton or Normal cycle at any water temperature (maximum of 140ºF or 60ºC) and tumble dry on low. Use a liquid detergent and make sure you turn the FR clothing inside out before you wash to reduce streaking from abrasion. Also, make sure that all soils or stains are removed from the garments before the wash process. 

 

Here are the things that you need to take note of in washing FR clothing:

  • Do not use soap (tallow soap with animal fats) and fabric softeners. These can leave a flammable coating which can be dangerous.
  • Do not use chlorine bleach or liquid non-chlorine bleach. This can reduce the level of flame resistance.
  • Do not use starches, peroxides, or vinegar 
  • Do not use hard water. This can deposit small packets of magnesium and calcium which are flammable.

 

FR clothing usually lasts for 5 years. Some rare FR gear would even last 20 years. Most lose their effectiveness after 25-50 wash cycles. FR clothing have specific laundering instruction and requirements and it’s important you check the label and follow manufacturer recommendations. This will guarantee a longer lifespan. Remember, FR clothing cannot wear out its FR properties easily unless the fabric is mishandled in some way. 

 

welder working wearing FR Clothing

 

Welding Spats and Why You Need Them

welder working

Welding safety starts with having the proper protective gear from top to bottom. Although more attention is given to protecting the welder’s head and body, it’s the legs that are being taken for granted. However, even your lower limbs need protection, without a doubt. So, to protect your legs while welding, you’ll need good quality welding spats that keep spatter and slag out of your shoes. This article will tell you more about welding spats and why you need them in any welding job you do.

 

What are welding spats and what are they for?

 

Welding spats are shoe covers that protect your legs from sparks, spatter, and extreme heat associated with the welding process. They’re strapped around your pant legs and boot tops to protect sparks from bouncing in the top of your boots. At the same time, they protect you from sparks that may fall on your feet. Remember, though, even if you’re using spats, it is still a good idea to make sure you have durable shoes under them to offer another layer of protection.

 

welder at work

 

Some spats wrap entirely around your boot with special hooks that keep them in place. Others go up to your leg with coverings over the top of your toe. Whichever you choose, just make sure that they fit nicely over the shoes you are wearing to ensure full protection. 

 

What to look for in welding spats

First things first, choose premium leather welding spats. You’ll want to go for cowhide split leather for this because it is lightweight and allows flexibility. It is also oil-resistant, moisture-proof, and is more durable. Since this protective equipment is used for all sorts of welding applications, including grinding, construction, torch, cutting, metal fabrication, and more, you’ll need spats that provide flexibility and durability with good heat and abrasion resistance. 

 

Since welding spats are designed to protect, the stitching is equally important. Check that the welding spats are stitched with fire-resistant thread like super-strong Kevlar thread because this provides an extra spark and abrasion resistance. Another essential thing to be particular with is the length. Finally, be sure that the spats give the most coverage for your welding boots. It is also better if your footwear is covered on both sides and from your toe to your leg. 

 

 

Welding spats should also feel comfortable when wearing them. The rear of the legging should have adjustable hook-and-loop closures for superior fit. It is also ideal to have straps underneath that ensure that the shoe cover stays in place while maintaining coverage. But, again, it’s the little things that matter when it comes to safety. 

 

Welding spats are essential for protection during the harshest conditions on the job. Using and wearing welding safety equipment is important because the job is hazardous. At any time, welders are exposed to metal fumes, UV radiation, cuts, shocks, abrasions, and burns. This is why it is important always to wear work gear that complies with set safety standards. You will also need to choose only the highest grade materials for protecting the most important part of the job — You.

3 Powerful Tips for Welding Safety

welding safety
  • Wear Welding Clothing and Protective Equipment
  • Hierarchy of Controls, Safety Pyramid for welders
  • Avoid the Top 4 Common Welding Safety hazards

Welding is very much a challenging yet rewarding job. It’s a craft that has been there since the Bronze age some 2000 years B.C. and will continue to be a growing field in the years to come. In fact, the U.S. will need some 372,664 welding professionals by 2026 so starting a career in welding is actually always a great idea. While welding is indeed a great career, it also comes with risks and that’s why here, we give you 3 powerful tips for welding safety. Whether you’ve been in the field for several years now or just new to the craft, these tips might just save your life. 

There isn’t any other way to stress how important safety is when it comes to welding. One can never be too careful. But just to state some facts, Liggett Law Groups states that 500,000 welders are injured in accidents per year. This number can be very concerning but just proves that safety is always a top priority in the field and that accidents can happen anytime. 

3 Power Tips for Welding Safety that can Save Your Life

Wear Welding Clothing and Protective Equipment

Welding Clothing and Protective Equipment were made for a crucial part of welding safety. Being a welder means being exposed to hazards like fumes and gases, extreme heat, electric shock, and fire and explosion. Not only that, materials and energy released in welding can cause serious burns, blindness, and respiratory damage in some cases. 

A welder must always dress for the occasion whatever the job is. This means a welder should always come to work with a welding helmet, welding gloves, welding jackets, welding boots, and respirators. For a list of protective clothing and equipment, read our blog on “Welding Clothing and Protective Equipment.” To get to know more about welding leathers for maximum protection read, “Leather Welding Clothing and Accessories every Welder Must Have.”

welding safety

Take note of the Safety Pyramid for welders, Hierarchy of Controls

There is a Safety Pyramid welders should be familiar with. If this is your first time hearing or reading about, then make sure you remember this. NIOSH has this pyramid called the Hierarchy of Controls which has a list all welders should know to minimize danger when welding or doing any manual work. This is listed in five categories. 

Elimination 

This is basically what it literally means. Elimination means removing any hazard from your workspace as briefly discussed. The important thing is to make it a habit.

Substitution 

Substitution, in this case, would mean to change whatever equipment, tool, or project you have to remove any hazard. For example, using a less reactive material for a certain job. 

Engineering Controls

This means isolating people from hazards. It’s bad enough that you have unwanted objects around. Make sure people are away from your workspace and have a safe distance all the time. 

Administrative Controls

What this means is that one should have a set of rules and should change workflow to improve safety. If a system doesn’t work, it has to change. If the rules aren’t really being followed, there has to be something done about it. 

PPE

As mentioned, Personal Protective equipment is always a must and should never be removed anytime while on the job. 

Avoid the Top 4 Common Welding Safety Hazards

While there is so much to look out for while welding, here are the top 4 common welding safety hazards and how to avoid and control them. 

Fumes and Gases

Overexposure to welding fumes and gases can cause health problems like cancer, respiratory illnesses, and some impaired speech and movement. This can be controlled by working in a place where there is adequate ventilation and exhaust to keep the fumes and gases away from the breathing zone. An approved respirator can also help. 

Physical Hazards

Physical Hazards are always present anytime on the job. These can cause cuts, burns, eye damage, or damage to the toes or fingers. With welding clothing and protective equipment, these can be avoided. 

Electric Shock

As a welder, you are always exposed to electricity and the possibility of electrocution. This can cause not only serious injury but also death. This can be minimized by inspecting your electric holder and welding equipment all the time before starting any job. A lockout and tag out procedure during repairs done by qualified repair technicians can also ensure that nothing malfunctions. 

Fire and Explosion

While electrocution can be a serious hazard, you also deal with fire and explosion. This is due to flammable materials that may be around the working area. This can be prevented by always making sure your workplace is clutter-free and that you make it a habit to remove anything around before you start working. Make sure you have a Class ABC fire extinguisher while welding and that the gauge is full. If there are flammable materials around, use a welding blanket to cover them just to make sure.  

 

3 Factors To Consider in Buying the Best Welding Gloves

welding gloves

3 Factors To Consider in Buying the Best Welding Gloves

welding gloves

With so many different kinds of welding gloves out there, it can be a challenge to choose the right one. Here we narrow down three factors to consider to make sure you get yourself the best welding gloves suited for you and the type of welding you do.

According to the Occupational Safety and Health Administration, an estimated 562,000 employees are at risk or exposure to chemical and physical hazards of welding, cutting, and brazing. That’s why having the proper welding clothing and protective equipment should always be a priority. 

welding gloves

3 Factors to consider in buying the best welding gloves

Whatever the style or material you have in mind, the functional principle remains. Welding gloves are protective equipment made to allow digit articulation while protecting the hands of the welder from extreme heat, electrical shocks, or ultraviolet and infrared radiation. These also enhance grip and provide abrasion resistance. Now, before you go ahead and buy yourself a pair, consider these 3 factors. factors. apibus leo.

Type of Welding Gloves, welding glove material

The first thing you have to consider is to know the type of welding you do. This would dictate the kind of materials your welding gloves should be made of. There are those made for MIG welding, TIG welding, and Stick Welding. For each comes these three types of welding gloves. 

MIG Welding Gloves

In Metal Inert Gas or MIG welding, metal is joined together by electricity by forming an arc between the metal and the electrode. This means that there will be more sparks flying and could get a lot messy when grinding down the weld. The best MIG welding gloves then should give maximum protection while providing some dexterity. 

These can either be made of either pigskin, cowhide, or deerskin. Pigskin is a tough hide and works well in oily and wet conditions. Cowhide, on the other hand, is a well-known leather for protective clothing because of its durability. Deerskin is a supple soft hide that provides a nice dexterity perfect for MIG welding. 

Stick Welding gloves 

Stick welding is the most common type of welding which is used for the construction of heavy steel structures. It’s similar to MIG welding such that it also uses electricity creating an arc to join metals together. This type of welding job involves a lot of sparks and high heat as well and should, therefore, offer robust protection appropriate for the kind of job.

Stick welding gloves are made of either cowhide or elk hides. While both are great materials for stick welding, elk hides don’t harden as fast as cowhides when they are exposed to heat which means there is less hand fatigue making it the ideal pair for stick welding.  

TIG Welding Gloves

Tungsten Inert Gas or TIG welding is a very technical style of welding which requires a certain type of precision. TIG welding gloves are perfect for this type of welding job since it provides finger sensitivity while still giving the needed protection. 

The best TIG welding gloves are made of goatskin, horsehide, pigskin, and deerskin. Goatskin is soft and supple and offers great abrasion. Horsehide, on the other hand, is less popular than cowhide known also for its good dexterity. It’s comfortable, tough, and durable.

If you are out in the market for one that you can use not just for one particular type of welding job, you can opt for welding gloves that are uniquely crafted for TIG and MIG welders searching for a durable yet extraordinarily light design. The Waylander Welding gloves are forged to be resistant against rubbing and scraping while maintaining comfort and mobility.

welding gloves

The outside layer is made of leather goatskin, proven to have the highest tensile strength of any welding material with the addition of a suede leather cowskin cuffs. These gloves are also hemmed with Kevlar lining to provide extra strength in extreme conditions with rubber and leather reinforcements on the back and palm of the hand to increase grip and protection.

Type of Insulation 

Now that you know the type of welding gloves you need and you know the right material for it, you now move on to the type of insulation. Whatever type of welding you do, one thing is for sure, a lot of heat will be produced from the spark and heat of the torch which will then heat up your hands. The type of insulation is then necessary so you get maximum protection from your welding gloves. 

Cotton liner

Cotton liners are good insulators for moderate temperatures which are usually above 450°F. It can be bulky but is a good choice for those who aren’t looking to spend that much. 

Kevlar liner

Kevlar is well known for its resistance to heat and cuts. It doesn’t drip or melt even at temperatures reaching 800°F. Unlike cotton liners, they aren’t bulky which makes it perfect for welding jobs that require dexterity like TIG welding. 

Aluminized Backing

This type of insulation is perfect for stick welding which involves high heat. Aluminized backing helps deflect heat away from the hands which allows welders to work longer and perform better. 

Hand Movement

The last factor to consider in buying yourself the best welding gloves is hand movement. The level of dexterity you need depends on the type of welding job you do. For TIG welding, for example, you will need welding gloves that would give you a high level of dexterity since it requires a high level of precision. For MIG welding and Stick welding, you need low level of dexterity but higher heat protection. 

With so many types and designs of welding gloves in the market, it is easy to fall for ones that look nice. In the end, we regret going with style and less of the most important features and end up spending more and getting less of the quality you deserve. Keep in mind these three factors to consider in buying the best welding gloves and you end up with nothing but comfort, quality, durability and maximum hand protection. 

welding gloves
Check our webshop.
Share this article:

You may also like

Welding Sleeves: A Complete Buying Guide

welding sleeves

Welding Sleeves: A Complete Buying Guide

welding sleeves

Welding Sleeves are the ideal alternative for arm protection especially when welding jackets become too heavy for the job. Flame resistant cotton welding sleeves or even leather welding sleeves are on the list of things to have for welders everywhere. They’re not that expensive and they’re easy to use. The question is, how do you choose the best welding sleeves, and what works best for what you do?

According to a 2019 study by Arnold and Itkin, there are over half a million American welders and 1 in 250 construction workers die from a welding injury. So, whether you’re a professional welder or not, welding clothing like welding aprons, jackets, sleeves, and protective equipment should be your top priority.

Why use welding sleeves?

Welding jackets have long been the standard for safety and protection while on a job. While it gives optimum protection, there are some that require more arm movement and functionality. And for that, you need welding sleeves – the ideal alternative that protects against heat, flame, and sparks, all while maintaining mobility and comfort.

Welding sleeves are also much cooler than welding jackets. This is why it’s used often most especially for those who work in warmer climates. On top of that, these sleeves aren’t just useful for welding, these are also used for gardening, grinding, woodcutting, or other jobs that need arm protection.

How to Choose the Best Welding Sleeves

Welding sleeves come in different styles, materials, lengths, and colors. It is basically up to you to choose what’s most comfortable for you. But in making that decision, you need to consider these factors.

Welding Sleeves length

Ideally, welding sleeves are worn from the wrist to mid-bicep. That way, the shoulders are free to move and function. For the average male who’s arm length measures 25 inches, an 18-inch sleeve would work. But for those who have longer arms, 23-25 inch welding sleeves would be a better choice.

A quick tip is to measure the length from your wrist to your regular short-sleeved shirt. That way, you get an accurate comfortable length specific for your body.

Level of Heat Protection and quality of material

The quality of the materials used for your welding sleeves directly affects the level of heat protection. To know what kind of material would work best, think of the kind of job you do most of the time.

Assess how exposed you are to heat and how long you work in that condition. Also, think about the amount of slag and spatter you are subjected to while on the job. Once you know that, you can now choose the material that would best fit you. There are different types of fire retardant fabrics and each has its distinct property and use. For welding sleeves, materials used could either be Kevlar, leather, or cotton. Let’s take a look at these three up close.

Types of welding sleeves

Kevlar welding sleeves

For maximum heat protection, go for Kevlar welding sleeves. Kevlar is a strong synthetic fiber that is used to protect workers from abrasions, cuts, and heat. These are lightweight, flexible, and overall comfortable.

Unlike cotton, Kevlar fiber doesn’t shrink when exposed to heat and can be machine washed. Dry cleaning wouldn’t be a problem for normal cleaning.

Leather welding sleeves

Leather fabric is well-known for its flexibility and resistance to heat, fire, and cutting. It’s economic and can be reused for a longer period of time. While it isn’t as machine wash friendly as Kevlar and cotton welding sleeves, cleaning leather is fairly easy, similar to how you clean leather welding jackets. Read more about how to choose the best welding jacket on our blog.

welding sleeves
Get this Waylander Welding sleeves and the welding apron seen on this photo on Amazon.

While leather welding sleeves are readily available in the market, there are those that are made of cowhide split leather reinforced with protective Kevlar which could be a better choice. Check out this type of welding sleeves on Amazon. The combination of the two fire-retardant fabrics gives you the functions and properties of both which makes it a reliable means of protection.

Cotton welding sleeves

Cotton sleeves which are considered to be the most comfortable since it is the lightest. It’s thinner and breathable but they’re also the least heat-resistant as compared to Kevlar and leather. It offers protection from sudden flame exposure and light-duty welding sparks. Like Kevlar, these are also machine-wash friendly.

Welding sleeves style and comfort

Most of the time people buy welding sleeves for style and how good it would look on them. Style comes after you get to know the right measurement and the right material for what you do.

In choosing, you need to consider comfort and functionality. This would mean answering a few questions like, “Would the style get in the way of how I work?,” “Is this easy to wear?,” or “Would this fall off while I work?”

welding sleeves

Welding sleeves come in a wide array of styles. There are those that are just worn and secured by adjustable elastic, those that have a thumb cutout that covers the hand partially, those that fit like compression sleeves and some that are adjustable by cuffs and snaps. There are also welding sleeves that have a cooling design that keeps your arms cool and dry so you can work longer and harder.

welding sleeves
Get the Waylander Welding sleeves seen on this photo on Amazon

Whatever style you choose, you need to make sure it all works together to give maximum comfort, functionality, and protection.

These three factors to consider in choosing the best welding sleeves serves as a complete buying guide for those who are out in the market to buy one for themselves. Whether you’re a beginner or an experienced welder, having a pair of welding sleeves is a great addition to your list of protective clothing knowing that you have that alternative means of protection anytime. Make sure you read more on welding clothing and protective equipment. 

welding sleeves
Check our webshop.
Share this article:

You may also like

How to Choose the right Welding Jacket

welding jacket

How to Choose the right Welding Jacket

welding jacket

Choosing the right welding jacket is a skill you must have as a welder. Your work ranges from high end heavy industrial welding down to simple lightweight metal fabrication. With that comes different types of welding jackets to choose from. Here we give you a complete guide on how to choose the right welding jacket specifically for your job.

For whatever work you do, you need to have the right welding clothing and protective equipment. It’s not an option, it’s a need.

welding jacket

What are welding jackets used for?

Welding jackets are designed to give full protection from the neck down to the waist and also to the shoulder down to the arms against burns from heat, sparks, and weld splatter. It also protects your skin from the intense UV and IR radiation from a welding arc which increases the risk of skin cancer.  While welding jackets are primarily for welding, of course, it can also be used when oxy-fuel cutting or heavy grinding.

Choosing the right welding jacket for the job

What is the best type of welding jacket?

The primary features of a welding jacket are pretty basic. It needs to be durable, fire-resistant, can provide thermal insulation, electrical resistance, and heat protection. Most importantly, it needs to be made out of high-quality materials and is comfortable and easy to use.  The quality of materials used for a welding jacket directly impacts the durability and price of a welding jacket. So if you go for a cheap one, you get less durability and quality. While there are different types of welding jackets, some are better than others and it depends on the quality of the material and the kind of job you do.

Types of Welding Jackets

Welding jackets are classified according to materials used in their manufacturing. There are cotton welding jackets, leather welding jackets, and nylon/kevlar welding jackets. Take a look at how they’re different and get to know which one fits the kinds of job you do.

Cotton welding jacket

If you work in warmer climates or you want a welding jacket for summer, and you perform medium or light work, the cotton welding jacket is best for you. Cotton itself is flammable but these are altered chemically to make it fire-resistant. These are lightweight, flexible, and breathable and are the most affordable type of welding jacket in the market.

Leather welding jacket

Leather welding jackets are for those who work in cooler climates and engage in heavy-weight welding work like high-end MIG and TIG welding. Leather is the most durable material when it comes to welding jackets and is best known for its properties like thermal resistance and fire resistance. This immediately makes it the top choice welders who do heavy welding work. Leather welding jackets can either be top grain and split grain which have different tanning and cutting methods. Whichever you choose, you are sure to be free from skin irritations.

welding jacket

The best type of leather used in manufacturing welding jackets is cowhide. It is durable and strong and won’t crack easily like other leather types yet breathable and flexible. It is resistant to heat and punctures and moisture. This makes cowhide leather welding jackets a top choice.

welding jacket

Nylon/Kevlar welding jacket

Nylon is a synthetic fabric that is lightweight, stretchable yet strong. Kevlar is a heat-resistant strong synthetic fiber. The combination of both produces fine material that primarily prevents skin burns. It is suitable for all industrial and heavy-duty welding work as it is breathable and highly flexible making it a good choice for those who also work in warmer climates.

What is the best size for a welding jacket?

Choosing the right size for a welding jacket is essential. If you pick the wrong one, you end up feeling uncomfortable which would affect work performance. Before you go ahead and choose a size, make sure to measure the size of your chest by wrapping a measuring tape around the upper body. If your belly area is considerably bigger, then measure the stomach area.  It is important you don’t wrap the measuring tape too tight to your body. A little allowance is always better. A tip would be to take the measurement while you wear your regular work clothes.

Which is more important, welding jacket material or convenience and comfort?

While some would prefer welding jacket material over convenience and comfort, the fact of the matter is safety comes first. So, in choosing, you should go with the one that you’re comfortable with so you avoid the risk of danger. There are some manufacturers who give a balance to high-quality material and comfort in welding jackets and it is up to you to find one that fits your need and your want.  Welders around the world need maximum protection from head to toe since they work in a high-risk environment. Underestimating what welding jackets can do by wearing the wrong one can expose welders to unwanted injuries or accidents. So whether it’s welding, oxy-fuel cutting, or heavy grinding, it’s a must to choose the right welding jacket specific for your job.

Check our webshop.
Share this article:

You may also like

Welding Clothing And Protective Equipment

welding clothing

Welding Clothing And Protective Equipment

welding clothing

If you have decided to try your hand at welding, that’s great! Many people think that welding is dangerous and dirty work, but it can be very fulfilling and satisfying. If you’ve been doing it for years, it always pays to go back to the basics of welding protection like welding clothing and protective gear. Before you get your hands dirty, it’s important you know that welding safety and comfort comes first.

Welding protective clothing and Personal Protective Equipment (PPE) protect you from the hazards you face when working. Here we give you the welding clothing and welding protective equipment you need to help you give optimum performance at work while staying safe and comfortable.

Welding Clothing and Protective Equipment

Welding Clothing

Welding Aprons

Now that you have your face, neck, lungs, and hearing protected. You now get welding protection for the front of the body which includes your torso and upper legs. This also gives protection for your clothes as well. Choosing the right welding apron is needed for a specific use. No one wants to end up having burns on the skin or holes on your shirt after you work. 

Welding Sleeves

Welding Sleeves give protection to parts of the front body that welding aprons do not cover. Your arms are very much exposed and need protection as well. To get the best protection, you can opt to choose leather welding sleeves would give the best protection. 

welding sleeves
Welding Gloves

Welding Gloves are a must. This gives protection to the hands up to the mid wrist area which is primarily what you use to handle dangerous equipment. This also gives protection against heat. 

Welding Jackets

Welding Jackets are designed to give full protection from the neck down to the waist and also to the shoulder down to the arms. Welding jackets can be made out of leather or flame-retardant cotton.

welding jacket
Welding Chaps

These are also called leg aprons and can run until the knees or the ankles. These are considered more useful than welding aprons because it’s attached to the leg itself. If your work needs a lot of movement, welding chaps are a better choice. 

Welding Leggings

Nobody likes spat burns. Welding leggings provide protection for the shin, ankles, and feet. These are sheath type shin pads that can be made out of reflective aluminum to flame-resistant leather as well. What you want are leggings that have a plate of metal on the shins for maximum protection. This also acts as a shield against sparks and splatter falling into the shoes so as not to burn the laces. 

Welding Coveralls

Coveralls are common for those who work in shops or garages. These loose fit jumpsuits provide protection from the lower neck down to the ankles including the arms and sleeves. The downside is that it doesn’t offer that much protection from high temperatures not unless they are designed for that specifically. The ideal way to use welding coveralls is to use it with the other welding protective clothing like the apron and chaps. 

Welding Safety Boots

A welder would sometimes choose to wear their ordinary shoes but for those who are serious in their welding career should definitely have a pair of safety boots. These boots are designed to protect your feet from heat exposure and welding splatter. Most importantly, these safety boots have steel toes that protect your feet from heavy pieces. Its soles are also usually anti-slip and anti-static.   

Welding Protective Equipment

Welding Blanket

A welding blanket isn’t something you use on your body but it does give protection for your body and the material and equipment around against sparks and splatter. Welding blankets are excellent shields against heat and fire and there are ways to know how to choose the right one. 

welding blanket
Welding Helmet

Protecting your face and neck is the most important protective equipment you should have. Without it, you expose the most vulnerable parts of your face to sparks and radiation harmful to the skin and eyes. If you’re a pro or a beginner welder, auto-darkening welding helmets are best to use so you don’t flip them up and down which can minimize fatigue in the neck. 

Safety Glasses

Safety glasses are also a must most especially when grinding and cutting. While it is never worn while welding, it’s a very important protective gear that you should consider as part of your must-haves. Your eyesight is the most important tool in what you do so you can never have too much protection.

blue weld
Welding Respirators

Melting metal means the emission of fumes. Welding respirators are used in small spaces where these fumes become irritating and harmful to the lungs. And while these are not used that much since they can be quite expensive, it’s always good to have around.

Ear Muffs/Earplugs

Welding processes are naturally loud. Hearing protection is essential for welders so having the right ear muffs or even earplugs to cancel the noise while you work is a priority.  These welding clothing and welding protective equipment are the basic needs for a welder to stay safe and comfortable while at work. Whether you’re just starting out or you have been working as a professional welder for years now, welding protection must and should be the first thing on your mind even before you handle that welding machine. So now, go get the welding PPE and welding clothing you’ve had your eye on and get to work!

Check our webshop.
Share this article:

You may also like